Dakota 2WD L4-2.5L VIN P (2001)
Output Shaft Bearing/Bushing: Service and Repair
42/44RE (A-500) 4 Speed
REMOVAL
1. Remove extension housing yoke seal.
2. Insert Remover 6957 into the extension housing. Tighten tool to bushing and remove bushing (Fig. 77).
INSTALLATION
1. Align bushing oil hole with oil slot in extension housing.
2. Tap bushing into place with Installer 6961 and Handle C-4171.
3. Install new oil seal in housing using Seal Installer C-3995-A (Fig. 78).
