Dakota 2WD V6-239 3.9L (1987)
Wiper Switch: Service and Repair
Fig. 26 Windshield Wiper Switch Removal
MODELS W/STANDARD COLUMN
1. Disconnect battery ground cable.
2. On models equipped with column shift, disconnect link rod.
3. Remove steering shaft coupling to wormshaft roll pin.
4. Disconnect electrical connectors from steering column jacket.
5. Disconnect horn wires and remove horn switch.
6. Remove steering wheel.
7. Pry out wiring trough retainers and lift off wiring trough.
8. Remove shift lever.
9. Remove two screws attaching lock housing cover to the lock housing.
10.
Remove lock housing cover.
11.
Remove washer/wiper switch assembly.
12.
Reverse procedure to install.
Fig. 2 Ignition lock removal. Models w/tilt column
Lock plate removal. Models w/tilt column
MODELS W/TILT COLUMN