dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins for Band: > < A/T - Clunk or Squawk Noise Shifting Into Reverse
Page 2
background image

Reverse Band

"M" Body Pass Car

Not Required

PN 4443187
Reverse Drum

B1, B2 - All W/B

Not Required

PN 4446111

D1 - 115" W/B

PN 4384578

D1, D2 - 131" W/B 8.25,

PN 4384579

9.25 R/A

N1-7 1/4" R/A 112" W/B

PN 4384584

N1-8 1/4" R/A 112" W/B

PN 4384585

D4 - 106" W/B

PN 4384886

D2 - Spicer 60 R/A

PN 4384486

A-727

Reverse Band

"M" Body Pass Car

Not Required

PN 4443185
Reverse Drum

B2 - All W/B

Not Required

PN 4446112

B3

Not Required

D1 - 115" W/B

PN 4384481

D1, D2 - 131" W/B 8.25,

PN 4384482

9.25 R/A
D2, D3 - Spicer 60 R/A

PN 4384581

D2, D3 - 131" W/B

PN 4384581

D4 - 106" W/B

PN 4384887

FIGURE 1

*NOTE:

BEFORE REPLACING A PROP SHAFT, CHECK THE PART NUMBER ON THE SHAFT
REMOVED FROM THE VEHICLE (FIGURE 1) TO VERIFY THAT REPLACEMENT IS NECESSARY.

REPAIR PROCEDURES

Install reverse band and drum as outlined in appropriate service manual.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:
Labor Operation No.

03-50-02-90, 7-1/4" Rear Axle
"N" and "M" . . . . . . . . . . . . .  

1.1 Hrs.

03-50-02-91, All Other Rear Axles
"B, A, D, X, W, N and M". . . . . . .  

1.3 Hrs.

21-00-01-90
"A, D and N"   . . . . . . . . . . . . 

3.4 Hrs.

"X and W" . . . . . . . . . . . . . . . 

5.2 Hrs.

"M" . . . . . . . . . . . . . . . . . . 

3.3 Hrs.

"B" . . . . . . . . . . . . . . . . . . 

3.1 Hrs.

21-00-01-60, Skid Plate Equipped
"X and W" . . . . . . . . . . . . . . . 

0.3 Hrs.

"N" . . . . . . . . . . . . . . . . . . 

0.2 Hrs.

21-00-01-61, 4 X 4 Equipped . . . . . . 
"N" . . . . . . . . . . . . . . . . . . 

3.9 Hrs.

FAILURE CODE:

68 - Noisy

All Technical Service Bulletins for Band: > < A/T - Clunk or Squawk Noise Shifting Into Reverse