Dakota 2WD V6-239 3.9L Magnum (1996)
Front Door Panel: Service and Repair
REMOVAL
Power Switch Housing
1.
Remove the retaining screw and the power switch housing (if equipped).
Door Trim Panel
2.
Remove the window regulator handle (if equipped).
3.
Remove the door inside latch release handle bezel.
4.
Remove the door pull strap (if equipped).
5.
Remove retaining screws and the armrest (if equipped).
6.
Remove the exterior mirror retaining screw and bezel (if equipped).
7.
Using a trim stick or other suitable flat tool, gently pry trim panel away from door and remove the trim panel from the vehicle.