Dakota 2WD V6-239 3.9L Magnum (1996)
Thermostat: Service and Repair
1. Disconnect battery ground cable, then drain coolant to below thermostat level.
Fig. 22 Alternator Support Bracket
2. On models with A/C, remove alternator support bracket, then partially remove alternator for access to thermostat.
3. Remove upper radiator hose at thermostat housing.
4. Move wiring harness behind thermostat housing out of the way.
5. Remove thermostat housing bolts, then housing, thermostat and gasket.
6. Reverse procedure to install with housing FRONT stamp pointed toward vehicle front. Tighten all bolts to specifications.