Dakota 2WD V6-239 3.9L Magnum (1996)
Turn Signal Switch: Service and Repair
1. Disconnect battery ground cable.
2. On models with tilt column, remove tilt lever.
Steering Column Cover
3. Remove lower cover.
Steering Column
4. Remove upper and lower lock covers from column, then lower fixed column cover.
5. Loosen steering column upper bracket nuts, but do not remove. Move upper fixed column cover to gain access to rear of multi-function switch.
6. Remove multi-function switch mounting screws with Snap On torx tool No. TTXR20B2, or equivalent, then gently pull switch away from column.
