Dakota 2WD V6-239 3.9L Magnum (1996)
Fuel Tank Mounting To Frame Rail
7. Disconnect the fuel supply line from the fuel pump module.
8. Disconnect the fuel vapor line from rollover valve.
9.. Lower tank from vehicle.
INSTALLATION
1. Place fuel tank on transmission jack and raise up enough to connect the fuel line, electrical connector and vapor hose to the fuel pump module.
2. Continue raising tank into position in cross-members and connect the two end retaining straps. Remove the transmission jack. Tighten all straps to
35 ft-lbs (47 Nm) torque. Do not overtighten retaining strap nuts.
3. Connect vent/fill hoses.
4. Refill fuel tank and inspect all hoses and lines for leaks.
5. Connect negative cable to battery.
