Dakota 2WD V6-3.9L VIN X (1997)
6.
Inspect the lower inertia latch cover for damage. If the cover is damaged, replace the cover with p/n 04883531AA.
7.
Open the lower latch cover and install the cover onto the inertia latch upper arm working it around the latch bracket.
8.
Align the lower latch cover, upper latch cover and latch bracket to the screw hole on the arm.
9.
Secure the cover with the screw and torque the screw to 4.15 Nm (37 in. lbs.).
10.
Inspect the inertia latch, covers, and screw for proper alignment. Perform a function check by moving the center armrest/console through its full
range of travel checking for freedom of movement. Adjust the center armrest/console inertia latch covers as necessary.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-10-00-90
0.2 Hrs.
FAILURE CODE:
P8 - New Part
