Dakota 2WD V6-3.9L VIN X (1997)
Wheel Bearing: Service and Repair
REMOVAL
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Remove brake caliper and rotor, refer to Brakes and Traction Control.
4. Remove hub/bearing spindle nut.
5. Slide hub/bearing off spindle.
INSTALLATION
1. Slide hub/bearing on spindle.
2. Install hub/bearing spindle nut and tighten to 251 Nm (185 ft. lbs.).
3. Install brake rotor and caliper, refer to Brakes and Traction Control.
4. Install wheel and tire assembly.
5. Remove support and lower vehicle.
