Dakota 2WD V6-3.9L VIN X (1997)
Fig 47 Cable Release Tab - Typical
6. Remove cable housing at throttle body mounting bracket by pressing forward on release tab with a small screwdriver (Fig. 47).
-
To prevent cable housing breakage, press on tab only enough to release cable from bracket.
-
Lift cable housing straight up from bracket while pressing on release tab.
-
Remove cable housing.
7. Remove cable from vehicle.
INSTALLATION
1. Snap cable end onto lever pin (Fig. 46).
2. Connect cable to throttle body mounting bracket (push down and lock).
3. Install remaining cable housing end into dash panel opening (snaps into position).
Fig 46 Throttle Cable At Throttle Body - Typical
