dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Airbag Control Module|Page 345 > < Recall - Airbag Control Module
Page 2
background image

Each involved dealer, to whom vehicles in the recall were invoiced (or the current dealer at the same street address), will receive enough of each ACM
Package to service about 25% of those vehicles. Each package contains one (1) ACM. Refer to the table above for the appropriate package application:

Owner Notification and Service Scheduling

All involved vehicle owners known to Chrysler are being notified of the service requirement by first class mail. They are requested to schedule
appointments for the service with their dealers. A copy of the owner notification letter is included.

Enclosed with each owner notification is an Owner Notification Form. The involved vehicle and recall are identified on the form for owner or dealer
reference as needed.

Service Procedure For Neon (PL) Vehicles:

1.

With the ignition key in the OFF position, disconnect and isolate the negative battery cable. WAIT TWO (2) MINUTES FOR THE SYSTEM
CAPACITOR TO DISCHARGE BEFORE CONTINUING.

Note: 

To enhance customer satisfaction, remember to record all radio settings before disconnecting the battery and to reset all electronic memory (clock,
radio settings, etc.) when you have completed the service procedure.

2.

For Manual Transmission Equipped Vehicles: Remove the shifter knob fastener and remove the shifter knob.

3.

Remove the front two (2) center console attaching screws located near the cup holders (Figure 1).

Recall - Airbag Control Module|Page 345 > < Recall - Airbag Control Module