Dakota 2WD V8-318 5.2L Magnum (1995)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Rear Antilock Valve Replacement
Fig. 24 Antilock Combination Valve Removal
NOTE: The antilock valves are serviced only as assemblies. Never replace a valve unless a fault has been confirmed.
-
Use the DRB II scan tool to verify a fault condition.
REAR BRAKE ANTI LOCK VALVE REMOVAL
The rear brake antilock valve is serviced as an assembly. The valve is not a repairable component and must be replaced if diagnosis indicates a
fault.
1. Disconnect and remove battery for easier access to valves and lines.
Fig 11 Disconnecting Front/Rear Brake Connecting Lines
2. Disconnect line to rear brakes at rear brake antilock valve.
3. Disconnect line to front brake antilock valve at combination valve.
