Dakota 2WD V8-4.7L (2008)
7. Remove the inboard brake pad (4) from the caliper adapter (1).
8. Remove the outboard brake pad (2) from the caliper adapter (1).
9. Remove the anti-rattle clips (1) from the pad (2).
Brake Pads - Installation
FRONT PADS
1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter.
3. Install new anti-rattle clips (1) to the brake pads (2).