Dakota 2WD V8-4.7L (2008)
2. Remove the brake lines (1&3) going into the brake hose (2).
3. Remove the brake line (2) from the brake hose (3).
4. Remove the mounting clip (1) for the brake hose (3) at the frame.
5. Remove the hose (3).
Front Caliper Hose
FRONT CALIPER HOSE
1. Raise and support vehicle.
2. Remove the tire and wheel assembly.
3. Remove the brake line (1) from the brake hose (6) at the frame.
4. Remove the brake hose mounting bolt (3) from the frame.
5. Remove the brake line (1) from the junction block (2) If necessary.
6. Remove the brake hose banjo bolt (4) at the caliper Discard the copper washers (5).
7. Remove the hose (6).
Rear Brake Lines - Brake Hose At Axle To Wheel Cylinders
REAR BRAKE LINES - BRAKE HOSE AT AXLE TO WHEEL CYLINDERS
