Dakota 2WD V8-4.7L (2008)
Vacuum Brake Booster: Service and Repair
Power Brake Booster - Removal
REMOVAL
1. Remove master cylinder (4). See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Master Cylinder -
Removal.
2. Disconnect vacuum line (6) at booster.
3. Remove clip (1) securing booster push rod (3) to brake pedal See: Brake Pedal Assy/Service and Repair/Removal.
4. Remove nuts (4) from booster mounting studs.