Dakota 2WD V8-4.7L (2008)
Electronic Brake Control Module: Service and Repair
Removal
REMOVAL
NOTE: If the ABM needs to be replaced, the rear axle type and tire revolutions per mile must be programed into the new ABM. For axle type
refer to Differential See: Transmission and Drivetrain/Differential Assembly/Specifications/Mechanical Specifications. For tire revolutions per
mile,See: Maintenance/Wheels and Tires/Tires/Specifications. To program the ABM refer to the Appropriate Diagnostic Information.
1. Disconnect the pump electrical connector (3) from the HCU (2).
2. Remove the module mounting screws (1).
3. Remove the module (1) from the HCU (2).