Dakota 2WD V8-4.7L (2008)
Battery Tray: Service and Repair
Battery Tray - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the battery, See: Service and Repair/Removal and Replacement/Battery - Removal.
3. Remove the Integrated Power Module (IPM) (1), See: Power and Ground Distribution/Power Distribution Module/Service and Repair/Removal.
4. Remove the Antilock Brake System (ABS) Hydraulic Control Unit (HCU) (3) bolts (2) from the battery tray (1).
5. Remove the battery negative cable retaining pushpins (5) from the battery tray.