Dakota 2WD V8-4.7L (2008)
1. Remove the upper control arm (4) See: Service and Repair/Front Upper Control Arm - Removal.
2. Secure the control arm in a vise (7).
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and
insure proper operation during the removal and installation process.
3. Install special tools C-4212-F (press) (6), 6761(Receiver) (1), 9601-2 (Reaction Plate) (2), 9601-1 (Driver) (5) to press the bushing (3) out of the
upper control arm (4).
Lower Control Arm Shock Bushing
LOWER CONTROL ARM SHOCK BUSHING
