Dakota 2WD V8-4.7L (2008)
6. Remove the nut and bolt (3) that attaches the spring shackle (5) to the rear frame bracket (4).
7. Remove the spring (6) from the vehicle.
8. Remove the shackle (2) from the spring (6).
Rear Spring - Installation
INSTALLATION
CAUTION: The rear of the vehicle must be lifted only with a jack or hoist. The lift must be placed under the frame rail crossmember located
aft of the rear axle. Use care to avoid bending the side rail flange.
1. Install the spring shackle (2) on the spring (6) finger tight.
2. Position the spring (6) on the rear axle pad. Make sure the spring center bolt is inserted in the pad locating hole.
