Dakota 2WD V8-4.7L (2008)
3. Using an adhesive cutting wire (4) or equivalent separate the glass adhesive (2) and remove the glass.
Installation
INSTALLATION
1. Clean the old glass sealer from the glass fence line.
2. Install new butel sealer around the edge of the glass if necessary.
3. Install the glass (1) and install the six nuts (2).
4. Tighten the nuts (2) to 4 Nm (35 in. lbs.).
5. Install the trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Door - Cargo (Club
Cab)/Panel-Trim/Installation
