dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
A/C Pressure Transducer - Removal|Page 5257 > < A/C Pressure Transducer - Description|Page 5254

Dakota 2WD V8-4.7L Flex Fuel (2009)

Page 1
background image

Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Pressure Transducer - Removal

REMOVAL

NOTE: It is not necessary to discharge the refrigerant system to replace the A/C pressure transducer.

1. Disconnect and isolate the negative battery cable.
2. Disconnect the wire harness connector (1) from the A/C pressure transducer (2).
3. Remove the A/C pressure transducer from the A/C liquid line (3).
4. Remove the O-ring seal (4) from the liquid line fitting and discard.

A/C Pressure Transducer - Removal|Page 5257 > < A/C Pressure Transducer - Description|Page 5254