Dakota 2WD V8-4.7L Flex Fuel (2009)
Headlamp Bulb: Service and Repair
Front Lamp Unit Bulb - Installation
BULB - HEADLAMP
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the
lamp, the socket or the lamp wiring.
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb
life will result.
1. Align the headlamp socket and bulb unit (2) with the keyed opening on the back of the front lamp unit housing (1).
2. Insert the socket and bulb into the housing until the socket is firmly seated.
3. Rotate the socket clockwise about 30 degrees to lock it into place.
4. Reinstall the front lamp unit onto the front fender. See: Service and Repair/Front Lamp Unit - Installation.
5. Reconnect the battery negative cable.