dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Removal and Replacement|Page 5360 > < Removal and Replacement
Page 2
background image

WARNING: To avoid serious or fatal injury when removing a deployed airbag, rubber gloves, eye protection, and a long-sleeved shirt should

be worn. There may be deposits on the airbag unit and other interior surfaces. In large doses, these deposits may cause irritation
to the skin and eyes.

WARNING: To avoid serious or fatal injury, use extreme care to prevent any foreign material from entering the side curtain airbag, or

becoming entrapped between the side curtain airbag cushion and the headliner. Failure to observe this warning could result in
occupant injuries upon airbag deployment.

NOTE: The following procedure is for replacement of an ineffective or damaged side curtain airbag. If the airbag is ineffective or damaged,

but not deployed, review the recommended procedures for handling non-deployed supplemental restraints. See: Service and Repair . If
the side curtain airbag has been deployed, review the recommended procedures for service after a supplemental restraint deployment
before removing the airbag from the vehicle. 
See: Service and Repair .

1. Check to be certain that the six U-nuts (2) are properly installed in the inner roof rail (1) and that they are in good condition.

2. Position the side curtain airbag into the vehicle as a unit.

Removal and Replacement|Page 5360 > < Removal and Replacement