Dakota 2WD V8-4.7L Flex Fuel (2009)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Removal
REMOVAL
NOTE: The ignition key (1) must be in the key cylinder (2) for cylinder removal.
1. Disconnect negative cable from battery.
2. Remove upper and lower covers (shrouds) from steering column.
3. Place shifter in PARK position.
4. NOTE: A retaining pin is located at the side of the key cylinder assembly.
Remove the key cylinder.
-
Rotate key to RUN position.
-
Press in on retaining pin using a suitable tool (2) while pulling key cylinder (1) from ignition switch.
