Dakota 2WD V8-4.7L Flex Fuel (2009)
7. If equipped with manual transmission remove flange (1) bolts (2).
8. Remove propeller shaft from vehicle.
CAUTION: Failure to follow these instructions may result in a driveline vibration.
Drive Shaft - Installation
INSTALLATION
NOTE: Flange bolts incorporate a Loctite(R) patch, new bolts should be used. If new bolts are not available, clean bolts and apply Mopar(R)
Lock & Seal Adhesive, or equivalent to the threads.
CAUTION: Failure to follow these instructions may result in a driveline vibration.
1. Slide slip yoke (1) onto automatic transmission/transfer case output shaft (2) with reference marks aligned.
