Dakota 2WD V8-4.7L Flex Fuel (2009)
Windshield Washer Spray Nozzle: Service and Repair
Washer Nozzle - Installation
INSTALLATION
1. From the top of the cowl plenum cover/grille panel (1), position the nipple end of the washer nozzle (2) through the mounting hole and engage the
anti-rotation tab of the nozzle into the anti-rotation keyway in the mounting hole.
2. Using hand pressure, push firmly and evenly on the top of the washer nozzle until the integral latch features lock into place on the underside of the
cowl plenum cover/grille panel.
3. From the underside of the cowl plenum cover/grille panel, reconnect the washer hose to the barbed nipple of the washer nozzle.
4. Reinstall the washer nozzle hose into its routing clips on the underside of the cowl plenum cover/grille panel.
5. Reinstall the cowl plenum cover/grille panel over the cowl plenum. See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Cowl
Panel Cover - Installation.
6. Close and latch the hood.
7. Reinstall both wiper arms onto the wiper pivots. See: Wiper Arm/Service and Repair/Wiper Arm - Installation.