Dakota 2WD V8-4.7L VIN J (2005)
CAUTION:
Be careful not to spray grease on the outside of the roller or roller cam. If grease is allowed to get on the outside of the roller or roller cam it must be
cleaned off using a clean shop towel. Grease left on the outside of the roller and roller cam may also cause a noise.
3. Open and close the door 10 times to work the grease onto the roller axle.
4. Wipe away any excess grease in the sprayed area.
5.
Repeat steps 1 through 4 for every door.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
