Dakota 2WD V8-4.7L VIN J (2005)
5. Using a grease pencil or equivalent, mark the position of the hinge on the door and b-pillar to aid installation.
6. Remove the two exterior bolts (3) per hinge.
7. From the inside of the vehicle remove the remaining bolt (2) attaching the hinge (1 or 4) to the b-pillar and remove the hinge.
NOTE: When installing a door it will be necessary to replace the shouldered door studs (1) with service studs without the shoulder in order to
achieve correct door position adjustments.
INSTALLATION
