Dakota 2WD V8-4.7L VIN J (2005)
CAUTION: Be careful not to crease the headliner.
NOTE: Headliner for Quad Cab model shown. Club Cab similar.
1. Position the headliner (6) in the vehicle through the door opening from which it was removed.
2. Connect the headliner wire harness connector (1) to the center high mounted stop lamp.
3. Raise the rear of the headliner (7) to the roof panel and install the two coat hooks.
4. Raise the front of the headliner to the roof panel and install the sun visor supports (3).
5. Connect the wire harness connector (5) located at the right A-pillar.
6. If equipped, connect the headliner wire harness connector (2) to the inside rear view mirror.
7. If equipped, install the overhead console.
8. Install the sun visors (4).
9. If equipped, install the front dome lamp.
10. Install the A-pillar trim panels.
11. If equipped, install the rear dome lamp.
