Dakota 2WD V8-4.7L VIN J (2005)
5. Lift the trim panel up and onto the lock rod (1) and attachment hooks (6).
6. Push the door trim panel straight downward until all of the retaining clips are fully engaged to the door.
7. Install the lower screws (5).
8. Install the screw (4) from the pull cup.
9. Install the screw (2) at the interior handle.
10. Install the manual window crank handle (2), if equipped.
11. Connect battery negative cable.
A-Pillar Trim
PANEL-A PILLAR TRIM
REMOVAL
1. Using a small flat bladed tool or equivalent, carefully open the two fastener covers in the A-pillar trim panel (1).
2. Remove the two bolts (2) that secure the A-pillar trim panel to the A-pillar and remove the trim panel.
INSTALLATION
