Dakota 2WD V8-4.7L VIN J (2005)
1. Reinstall the HCU assembly (5) to the vehicle.
2. Install HCU assembly (5) on the battery tray (2) and Tighten the nuts to 15 Nm (11 ft. lbs.).
3. Install the brake lines (3) to the HCU (1) and tighten to 19 Nm (170 inch lbs.).
4. Install the electrical harness connector (4) to the ABM (3).
5. Install the battery cables to the battery.
6. Bleed ABS brake system.