Dakota 2WD V8-4.7L VIN J (2005)
Brake Hose/Line: Service and Repair
Installation
INSTALLATION
REAR BRAKE LINES - BRAKE HOSE AT AXLE TO WHEEL CYLINDERS
1. Install the line into the bend over tab at axle and then bend over the tab.
2. Install the brake line to the clip on the spring hanger.
NOTE: If brake line (3) was replaced
3. Install the brake line (3) at the brake hose (2) located at the axle.
4. Install the brake line (1) at the wheel cylinder (2).