Dakota 2WD V8-4.7L VIN J (2005)
6. Disengage the park brake cable (1) from the lever (3).
7. Compress cable tabs on each cable end fitting at the brake cable support plate (2).
8. Remove the cables(4) from the brake cable supports (2&3).
INSTALLATION
1. Push each cable end through the brake cable support plate hole (2) until the cable end fitting tabs lock into place.
NOTE: Pull on the cable to ensure it is locked into place.
2. Install the rear cables (1) into the park brake lever behind the rear of the brake assembly (3).
