Dakota 2WD V8-4.7L VIN J (2005)
1. Install fan blade assembly to viscous fan drive. Tighten bolts to 23 Nm (17 ft. lbs.) torque.
2. Position fan blade/viscous fan drive assembly into the radiator shroud.
3. Install the radiator shroud and fan drive assembly into the vehicle.
4. Install fan shroud retaining screws. Tighten screws to 6 Nm (50 lbs. inch).
5. Install fan blade/viscous fan drive assembly to water pump shaft.
6. Install the upper radiator hose.
7. Fill cooling system.
8. Connect battery negative cable.
