Dakota 2WD V8-4.7L VIN J (2005)
1. Position the recirculation door actuator (1) onto the air inlet housing (2). If necessary, rotate the actuator slightly to align the splines in the
recirculation air door pivot shaft (3) with those on the actuator output shaft (4).
2. Install the three screws (1) that secure the recirculation door actuator (2) to the air inlet housing (3). Tighten the screws to 2 N.m (17 in. lbs.).
3. Position the air inlet housing (2) onto the top of the HVAC housing (6).
