Dakota 2WD V8-4.7L VIN J (2005)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Sensor-Ambient Air Temperature
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Disconnect the wire harness connector (1) from the ambient air temperature sensor (2).
3. Remove the bolt (3) that secures the ambient air temperature sensor to the front bumper beam (4) and remove the sensor.
INSTALLATION
1. Position the ambient air temperature sensor (2) to the front bumper beam (4).
2. Install the bolt (3) that secures the ambient air temperature sensor to the front bumper beam. Tighten the bolt securely.
3. Connect the wire harness connector (1) to the ambient air temperature sensor.
4. Reconnect the negative battery cable.
