dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Overhead Console|Page 6653 > < Electronic Vehicle Information Center|Page 6650
Page 1
background image

Driver/Vehicle Information Display: Service and Repair
Overhead Console

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Remove the overhead console retaining screw (3), located in the front of console near the windshield.
3. Using your fingertips, grasp the sides of the overhead console (2) and pull straight down evenly to disengage the two snap clips at the rear of the

unit.

4. Lower the overhead console from the headliner far enough to access the wire harness connector (2).
5. Disconnect the roof wire harness connector (2) from the electronic overhead module.
6. Remove the overhead console from the vehicle.

INSTALLATION

Overhead Console|Page 6653 > < Electronic Vehicle Information Center|Page 6650