Dakota 2WD V8-4.7L VIN J (2005)
8.
With the StarSCAN(R) powered OFF, connect the USB Key and Gender Changer to the StarSCAN(R) USB port (Fig. 2).
9.
Connect the StarSCAN(R) to the vehicle (if not already connected).
10.
Power ON the StarSCAN(R).
11.
Download the flash file from the USB key to the StarSCAN(R). Using the StarSCAN(R) at the "Home" screen:
a.
Select "Flash Download", then select "Retrieve files from the USB storage device"
b.
Highlight the appropriate calibration. Select "Download to Scan Tool"
c.
When the download is complete, select "Close" and "Back".
12.
Reprogram the ECU. Using the StarSCAN(R) at the "Home" screen:
a.
Select "ECU View".
b.
Select "More Options".
c.
Select "ECU Flash".
d.
Highlight the appropriate calibration.
e.
Select "Update Controller". Follow the on screen instructions.
f.
When the update is complete, select "OK".
g.
Verify the part number at the top of the "Flash PCM" screen has updated to the new part number.
13.
Is "WCM - Wireless Control Module" displayed in the "ECU Overview" screen list of modules?
a.
Yes >> go to Step # 14.
b.
No >> go to Step # 15.
14.
Program the PCM to the Wireless Control Module (WCM). Using the StarSCAN at the "Home" screen:
