Dakota 2WD V8-4.7L VIN J (2005)
4. Working from the left side of the vehicle, carefully pull the floor distribution duct from the vehicle.
5. Disconnect the instrument panel and body wire harness connectors from the ORC connector receptacles located on the left facing side of the module.
To disconnect the connectors from the ORC:
a. Slide the red Connector Position Assurance (CPA) lock on the top of the connector toward the left side of the vehicle (Figure 2).
b. Depress the edge of the CPA lock closest to the ORC to release the connector latch tab and pull the connector straight away from the ORC
module connector receptacle (Figure 2).
