Dakota 2WD V8-4.7L VIN J (2005)
1. Check to be certain that the six U-nuts (2) are properly installed in the inner roof rail (1) and that they are in good condition.
2. Position the side curtain airbag into the vehicle as a unit.
3. Align each of the two plastic push-in fasteners (7) on the airbag channel with their holes in the inner roof side rail and push them straight in until
they are fully seated.
4. Reconnect the body wire harness connector (2) for the side curtain airbag to the connector receptacle at the front of the inflator.