Dakota 2WD V8-4.7L VIN J (2005)
5. Loosely install the six screws (6) that secure the side curtain airbag to the U-nuts (3) in the inner roof rail (8).
6. Working from front to back, tighten each of the six screws. Tighten the screws to 6 N.m (50 in. lbs.).
7. Engage the metal clip (5) that secures the side curtain airbag rear tether to the cab roof rear header (4) above the rear window opening.
8. Engage the metal clip (10), then the two plastic retainers (9) that secure the side curtain airbag front tether to the inner A-pillar (1).
9. Reinstall the headliner into the vehicle.
10. Do not reconnect the battery negative cable at this time. The supplemental restraint system verification test procedure should be performed
following service of any supplemental restraint system component.
