dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Side Air Bag Fastener Torque|Page 5247 > < Recall - Side Air Bag Fastener Torque|Page 5245
Page 8
background image

38.

Using a trim stick, disengage the release clip and remove the right rear coat hook from the headliner (Figure 9).

39.

Using a trim stick, disengage the release clip and remove the left rear coat hook from the headliner (Figure 9).

40.

Remove both upper headrest guides from the headliner.

41.

Fully recline both front seat backs.

42.

Carefully pull the headliner down and place it on the seat backs.

43.

Inspect the left and right SABIC modules for damage to the curtain material and/or curtain tether where the sun visor screws were attached to the
roof panel (Figure 10).

44.

>

If both SABIC modules are
NOT damaged, continue
with Step 45.

>

If a SABIC module has a screw hole in the curtain material or in the tether, then the SABIC module must be replaced as follows:

Recall - Side Air Bag Fastener Torque|Page 5247 > < Recall - Side Air Bag Fastener Torque|Page 5245