Dakota 2WD V8-4.7L VIN J (2005)
5. Remove the three nuts (2) that secure the ORC (1) to the studs of the ORC mount (4) welded onto the top of the floor panel transmission tunnel
(3).
6. Remove the ORC from the ORC mount.
INSTALLATION
1. Carefully position the Occupant Restraint Controller (ORC) (1) onto the studs of the ORC mount (4) on the floor panel transmission tunnel. When
the ORC is correctly positioned, the arrow on the ORC label will be pointed forward in the vehicle and the ORC connector receptacles will be
facing the left side of the vehicle.
2. Install and tighten the three nuts (2) that secure the ORC to the studs of the ORC mount that is welded onto the floor panel transmission tunnel.
Tighten the nuts to 6 N.m (50 in. lbs.).
3. Reinstall the floor distribution duct onto the bottom of the heater-air conditioner housing.
4. Reinstall the instrument panel into the vehicle.
