Dakota 2WD V8-4.7L VIN J (2005)
8. Remove the screw (2) that secures the retractor (1) to the inner C-pillar (3).
9. Lift the retractor upward far enough to disengage the tab on the back of the retractor from the T-slot in the inner C-pillar.
10. Remove the rear seat belt and retractor.
INSTALLATION
1. Position the rear seat belt and retractor (1) to the inner C-pillar (3).
2. Engage the tab on the back of the retractor into the T-slot in the inner C-pillar.
3. Install and tighten the screw (2) that secures the retractor to the inner C-pillar. Tighten the screw to 39 N.m (29 ft. lbs.).
