Dakota 2WD V8-4.7L VIN J (2005)
12. Remove the two screws (2) that secure the seat belt turning loop and height adjuster (3) bracket to the upper roof rail (1).
13. Remove the front seat belt and retractor from the vehicle as a unit.
INSTALLATION
1. Position the seat belt turning loop and height adjuster (3) bracket to the mounting holes in the upper roof rail (1).
2. Install and tighten the two screws (2) that secure the seat belt turning loop and height adjuster bracket to the upper roof rail. Tighten the screws to
39 N.m (29 ft. lbs.).
3. Position the trim cover (3) to the headliner (2) opening around the door striker and the seat belt turning loop adjuster bracket on the upper roof rail
(1).
4. Using hand pressure, press firmly and evenly on the trim cover until the two snap clips that secure it to the upper roof rail snap into place.