Dakota 2WD V8-4.7L VIN J (2005)
2. Install and tighten the nut (3) that secures the buckle unit to the stud. Tighten the nut to 41 N.m (30 ft. lbs.). Be certain to hold the buckle in its
properly oriented position while tightening the nut.
3. Push the buckle up through the crevice between the rear seat cushion and the rear seat back.
4. Lower the rear seat cushion back to its normal seating position.
5. Engage the buckle through the elastic loop at the back of the seat cushion.
