Dakota 2WD V8-4.7L VIN J (2005)
1. Align the pump (4) with the mounting holes on the engine.
2. Install 3 pump mounting bolts through the pulley access holes (1). Tighten the bolts to 28 Nm (21 ft. lbs.).
3. Install the pressure hose (2) to the pump (4). Tighten the pressure hose to 31 Nm (23 ft. lbs.).
4. Install reservoir return hose (3) to the reservoir (1).
5. Install the serpentine drive belt.
6. Fill the power steering pump.