Dakota 2WD V8-4.7L VIN J (2005)
4. Remove the rear shock absorber (6) from the vehicle.
INSTALLATION
1. Position the shock absorber (6) to the vehicle.
2. Install the bolt (1) through the frame bracket and the shock (3). Install the nut (2) to the top bolt (1). Tighten to 102 Nm (75 ft. lbs.).
3. Install the bolt (1) through the axle bracket and the shock (3). Install the nut (2) to the bolt (1). Tighten to 102 Nm (75 ft. lbs.).
4. Remove the support and lower the vehicle.