Dakota 2WD V8-4.7L VIN J (2005)
1.
Remove the valve body attachment bolt as shown in Figure 7 (if not previously done).
2.
Clean the oil pan and magnet. Wipe magnet with a clean dry cloth.
3.
Clean transmission oil pan surface using a plastic scraper.
CAUTION:
Do not scratch the transmission case oil pan sealing surface.
4.
Clean the one loose valve body attachment bolt with brake clean or equivalent to remove all oil.
5.
Apply one drop of MOPAR Lock and Seal Adhesive (P/N 04318031) to the threads of the valve body bolt that was cleaned in Step 4, about 1/4"
up from the bottom.
CAUTION:
Do not let the adhesive dry on the threads prior to installation.
