Dakota 2WD V8-4.7L VIN J (2005)
13. Remove the retainers securing the solenoid switch valve (1), manual valve (2), and the low/reverse switch valve (3) from the valve body and
remove the associated valve and spring. Tag each valve and spring combination with location information to aid in assembly.
Assembly
ASSEMBLY
1. Lubricate valves, springs, and the housing valve bores with clean transmission fluid.
2. Install solenoid switch valve (1), manual valve (2), and the low/reverse switch valve (3) into the valve body
3. Install the retainers to hold each valve into the valve body.